HC7306, 1.8 m, Thermo-plastic High Pressure Hydraulic Hose, 9.7 mm Internal Diameter
Enerpac H700-Series hydraulic hoses have a 4:1 safety factor and can withstand a wide range of demanding high-pressure applications up to 10,000 psi (700 bar). Choose from two diameter sizes, a variety of connection types, and lengths up to 50 ft (15m).
Weight (kg)
1,7
End 1 Coupler
3/8" NPTF
Our experts will contact you within 24 hours.
Product Description
H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.
Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.
Diameters available 0.25 and 0.38” (6.4 and 9.7mm), and connection types include ¼” NPTF, â…œ" NPTF and CH604.
A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.
- For demanding applications, featuring a 4:1 safety factor
- Maximum working pressure of 10,000 psi
- Outside jacket is polyurethane, to provide maximum abrasion resistance
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency
- Vinyl strain relief guard on both ends of hose to improve life and durability on all models.
Technical Specifications
| Parameter | Value |
|---|---|
| Weight (kg) | 1,7 |
| End 1 Coupler | 3/8" NPTF |
| End 2 Coupler | CH604 |
| Hose Length (m) | 1,8 |
| Max Pressure (bar) | 700 |
| Inner Diameter (mm) | 9,7 |
| Oil Capacity (cm³) | When using greater hose lengths, it is sometimes necessary to fill the pump reservoir after filling the hoses. To determine the hose oil capacity, use the following for 9,7 mm inside diameter hoses: Capacity (cm3) = 73,8981 x Length (m) |
Need technical consultation?
Our team of engineers is ready to help you choose the right product or design a custom solution for your specific needs.