Accessories
Dutch-made induction heaters for bearings and components — precise, flameless and energy-efficient mounting and dismounting.
Yokes
Interchangeable yokes allow heating of bearings and workpieces with different inner diameters. Available in standard and pivoting versions and in a wide range of sizes — from the smallest to yokes for the heaviest workpieces.
- Standard and pivoting yokes for both the Easytherm (ET) and Suretherm (ST) ranges
- The profile determines the min. inner diameter; the yoke length depends on the model
- Optional discounted yoke sets (SET)
Yoke profile → min. inner diameter
| Yoke profile | Min. inner diameter |
|---|---|
| 7 × 7 | Ø 10 mm |
| 10 × 10 | Ø 15 mm |
| 14 × 14 | Ø 20 mm |
| 20 × 20 | Ø 30 mm |
| 25 × 24 | Ø 35 mm |
| 30 × 26 | Ø 40 mm |
| 40 × 38 | Ø 55 mm |
| 50 × 48 | Ø 70 mm |
| 60 × 60 | Ø 85 mm |
| 70 × 70 | Ø 100 mm |
| 80 × 80 | Ø 115 mm |
| 90 × 90 | Ø 130 mm |
| 100 × 100 | Ø 145 mm |
| 150 × 150 | Ø 215 mm |
Yoke length by model
| Model | Yoke length |
|---|---|
| Easytherm 1 | 125 mm |
| Easytherm 2 | 200 mm |
| Easytherm 3.5 | 280 mm |
| Easytherm 15 | 350 mm |
| Easytherm 30 | 490 mm |
| Suretherm 5X / 10X | 200 mm |
| Suretherm 20X | 280 mm |
| Suretherm 30X | 330 mm |
| Suretherm PRO 1X | 490 mm |
| Suretherm PRO 3X | 750 mm |
| Suretherm PRO 6X | 1080 mm |
Extension yokes
Extension yoke sets widen the heater's working range and allow heating of workpieces with a larger outer diameter than the standard yoke permits.
- Supplied as sets (e.g. 40×50×75, 50×50×120, 70×82×200, 80×92×200 mm)
- Compatible with the corresponding Easytherm and Suretherm models
Carrying cases
Rugged transport cases for safely moving smaller heaters and their accessories between workplaces.
- For selected Easytherm and Suretherm models
Trolleys
Mobile undercarriages for easy handling of heavier heaters in production and in the workshop.
- "On a Trolley" version for the Easytherm 30 and the Suretherm PRO models
Flexible inductors
A flexible inductor enables heating of components of various geometries (gears, couplings, bearings) with the Extratherm EHX-03A generator.
- Flexible cable for hard-to-reach areas
| Length | Max. temperature |
|---|---|
| 15 m | 300 °C |
| 25 m | 300 °C |
| 35 m | 300 °C |
Fixed coils
Dedicated fixed coils designed for specific workpiece geometries.
- Coil for labyrinth rings
- Coil for NU / NUP ring sets
Temperature sensors
Magnetic temperature sensors for precise measurement and control of heating. Available in 240 °C and 400 °C versions and in various lengths.
- Cable lengths 500 / 1000 / 1500 mm
- 1 or 2 sensors depending on the heater model
Lifting device
Manipulator for safe placement and removal of heavy workpieces.
- Specifically for the largest model, the SURETHERM PRO 6X
Consumables and supplementary accessories
- Heat-resistant gloves
- Special mounting grease
- Replacement support rails
Fitting Tool Set
A mechanical tool kit for the precise and gentle mounting and dismounting of bearings without damage.
- Complements the induction heaters during bearing installation
Interested in TM products?
Contact us for a price quote, technical consultation or product demonstration.